Connecting to a WLAN
To connect to the WLAN, follow these steps:
1.Be sure that the WLAN device is on.
2.From the Windows desktop, tap the network status icon in the notification area, at the far right of the taskbar.
3.Select your WLAN from the list.
4.Tap Connect.
If the WLAN is a
5.Follow the
After the connection is made, point over the network status icon in the notification area, at the far right of the taskbar, to verify the name and status of the connection.
Using HP Mobile Broadband (select models only)
HP Mobile Broadband enables your tablet to use WWANs to access the Internet from more places and over larger areas than it can by using WLANs. Using HP Mobile Broadband requires a network service provider (called a mobile network operator), which in most cases is a cellular phone network operator. Coverage for HP Mobile Broadband is similar to cellular phone voice coverage.
When used with mobile network operator service, HP Mobile Broadband gives you the freedom to stay connected to the Internet, send email, or connect to your corporate network whether you are on the road or outside the range of
HP supports the following technologies:
●HSPA (High Speed Packet Access), which provides access to networks based on the Global System for Mobile Communications (GSM) telecommunications standard.
●
●LTE (Long Term Evolution), which provides access to networks supporting LTE technology.
You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband service.The serial number and product number are located on the bottom edge and/or the back of your tablet.
Some mobile network operators require the use of a subscriber identity module (SIM). A SIM contains basic information about you, such as a personal identification number (PIN), as well as network information. If the SIM is not preinstalled, it may be provided in the HP Mobile Broadband information provided with your tablet or the mobile network operator may provide it separately from the tablet.
Connecting to a wireless network 13