Connections
Connecting to a TV with an Audio/Video cables and RF cable
1.Connect the RF cable as shown.2.Using video/audio cables, connect the VIDEO OUT (yellow) / AUDIO OUT (white and red) terminals on the rear of the product to the VIDEO IN (yellow) / AUDIO IN (white and red) terminals of your TV.
3.Plug in the product and TV.4.Turn on the product and TV.To ANT INTo TVRF cable | Audio/Video cable |
|
Red White Yellow
To ANT INPUT✎✎NOTE
`` The RF cable connection of this product sends only signals of TV. You must connect the Audio/Video cables to watch output from your product.
`` Noise may be generated if the audio cable is placed too close to the power cable.
`` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 29~30)
`` The number and position of terminals may vary depending on your TV set. Please refer to the user manual of your TV. `` If there is only one audio input terminal on the TV, connect it to the AUDIO OUT (right/white) terminal of the product.
English 25