Samsung Blu-ray Player J5500 BD-J5500 BD-J5500/EN Media Play, Contact Samsung, Terms of Service Agreement, Reset, Disc, Playing Files on a USB Device, Playing a Commercially Recorded

Auto Upgrade Notification

 Samsung Electronics takes no legal

responsibility for player malfunction caused

Media Play

If you have connected the player to your network, and then set Auto Upgrade Notification on, the player automatically notifies you when a new software version is available for the player.

To set Auto Upgrade Notification on, follow these steps:

1.Select Auto Upgrade Notification, and then press the E button.

2.Use the ▲▼ buttons to select On, and then press the E button.

If there is a new software version available, the player notifies you with a popup message.

1.To upgrade the firmware, select Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn the player on or off manually during an upgrade.)

2.The update progress popup appears.

3.When the update is completed, the player will restart automatically.

✎NOTES

The upgrade is complete when the player turns off, and then turns on again by itself.

Never turn the player off or on manually during the update process.

by an unstable Internet connection or

consumer negligence during software

upgrade.

Contact Samsung

Provides contact information for assistance with your player.

Terms of Service Agreement

Lets you view the general disclaimer regarding third party contents and services.

Reset

Returns all settings to their factory defaults except for the network settings.

Playing a Commercially Recorded

Disc

1.Press the 8 button to open the disc tray.

2.Place a disc gently into the disc tray with the disc's label facing up.

3.Press the 8 button to close the disc tray. Playback starts automatically.

Playing Files on a USB Device

There are two methods you can use to play or view multimedia files located on a USB device through your player.

Method 1

1.Turn the player on.

2.Connect the USB device to the USB port on the front panel of the player. The New Device Connected pop-up appears.

PLAY DISCPHOTOSVIDEOSMUSIC

		New device connected.
		123
		Photos
	No Disc	Videos
		Music
		> Move " Enter	' Return
App 1	App 2	App 3 App 4 App 5 App 6	Change Device	Settings

✎NOTES

If the pop-up does not appear, go to Method 2.

3.Use the ▲▼ buttons to select Photos, Videos or Music, and then press the E button. The Photos, Videos & Music screen appears listing the content of the device. Depending on how the contents is arranged, you will see either folders, individual files, or both.

✎NOTES

Even though the player will display folders for all content types, it will only display files of the Content Type you selected in Step

3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and going to Step 3 in Method 2 below.

4.If necessary, use the ▲▼◄► buttons to select a folder, and then press the E button.

5.Select a file to view or play, and then press the E button.

6.Press the RETURN button to exit a folder or the EXIT button to return to the Home screen.

7.Go to pages 18~20 for instructions that explain how to control playback of videos, music, and pictures on a USB device.

16