connections
Connecting to a TV (SCART)
1
Using scart cable, connect to SCART terminal on the rear of the DVD player to the SCART IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until the Video signal from the DVD player appears on the TV screen.
Scart Cable
Do not use the connection Scart and
Component Video (Y, Pb, Pr) simul-
taneously.
Note
-Noise may be generated if the audio cable is too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)
-The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.
-Please do not connect Scart and Component Video (Y, Pb, Pr) output simultaneously, as they may inter- fere and degrade both video output quality.