Samsung DVD-1080P9 English _7, Note, Rear Panel, -See pages 29 ~ 31 to get more information on how to use the setup menu

Rear Panel

SETUP ●

1.SCART JACK

-Connect to a TV scart input jack

2.AUDIO OUT JACKS

-Connect to the Audio input jacks of your television or audio/video receiver.

3.DIGITAL AUDIO JACKS

-Use either an coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

4.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If P-SCAN Video Output is selected in Setup Menu, progressive scan mode will work.

-If I-SCAN Video Output is selected in Setup Menu, interlaced scan mode will work.

5.HDMI OUT JACK

-Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compat- ible TV, HDMI will be output automatically within 10 seconds.

6.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conver- sion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

-There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format.

-Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

-See pages 29 ~ 31 to get more information on how to use the setup menu.

English _7