Setting Up the DivX
1.With the unit in Stop mode, press the MENU button.
2.Press the √/® buttons to select DivX Page, then press the † or ENTER button.
3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.
Note :
•Press Ok will make the registration code window disappear.
•DivX can only be accessed at stop mode.
Reference
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem |
|
|
|
| Action |
|
|
|
|
| |
The screen is | • Press the |
|
| button (in front panel) for more than 5 seconds under no disc | |
blocked | inside. All settings will revert to the factory settings. | ||||
|
|
|
|
|
|
Forgot password. | • Press the |
|
|
| button (in front panel) for more than 5 seconds under no |
disc inside. All setings including the password will revert to the factory | |||||
| settings. Don’t use this unless absolutely necessary. | ||||
|
|
|
|
|
|
Specifications
| Power Requirements | AC | |
|
|
| |
| Weight | 1.2 KG | |
|
|
| |
| Power Comsumption | For the power supply and Power Consump- | |
| tion, refer to the label attached to the product. | ||
General |
| ||
|
| ||
Dimensions | 360mm (W) X 207mm(D) X 42mm (H) | ||
| |||
|
|
| |
| Operating Temperature | +5°C to +35°C | |
| Range | ||
|
| ||
|
|
| |
| Operating Humidity Range | 10 % to 75 % | |
|
| R(Red) : 0.7 | |
|
| G(Green) : 0.7 | |
| Scart Jack | B(Blue) : 0.7 | |
| Composite Video : 1.0 | ||
Video |
| ||
| Luminance Signal : 1.0 | ||
Output |
| Color Signal : 0.3 | |
|
|
| |
|
| Y : 1.0 | |
| Component Video | Pr : 0.70 | |
|
| Pb : 0.70 | |
| Frequency Response | 20Hz ~ 20kHz | |
|
|
| |
Audio | Maximum Output Level | 2Vrms | |
|
| ||
Output | Digital Audio Out | Coaxial terminal (S/PDIF) | |
| |||
|
|
| |
| Output terminal | RCA, SCART | |
|
|
|
11