Samsung DVD-F1080 HDMI VIDEO Specifications, Connecting to a TV with DVI Jack (DVD-F1080only), Connecting to a TV with HDMI Jack (DVD-F1080only)

Connecting to a TV with DVI Jack (DVD-F1080 only)

1

Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD player to the DVI IN terminal of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

RED	WHITE
	Audio Cable
RED	WHITE	HDMI-DVI cable
		(Not Included)

3

Press the input selector on your TV remote control until the DVI signal from the DVD player appears on your TV screen.

Connecting to a TV with HDMI Jack (DVD-F1080 only)

1

Using the HDMI-HDMI cable connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV.

2

Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen.

HDMI cable (Not Included)

HDMI VIDEO Specifications

-Depending on your TV, certain HDMI output resolutions may not work.

-Please refer to the user's manual of your TV.

-If HDMI or HDMI-DVI cable is plugged into TV, the DVD player’s output is set to HDMI/DVI within 10 seconds.

-If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.

-If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player using your TV remote control. This is only available with Samsung TVs that support Anynet+(HDMI-CEC). (See page 30).

-If your TV has an logo, then it will Supports the Anynet+ Function.

12