PictBridge : RESET
❾✃ Initializes
1.Connect the camera to your printer. The [USB] menu must be set to [PRINTER] before you connect the camera to the printer.(See p.69)
2.Use the LEFT and RIGHT buttons to select the [RESET] menu tab.
3.Use the UP and DOWN buttons to select the desired submenu value, and then press the OK button.
- If [NO] is selected : Settings will not be reset.
- If [YES] is selected : All print and image settings will be reset.
RESET
NO
YES
MOVE:SET:OK
❾➪ Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
❾➓73❾➔