Imprinting the recording date
❾✃ There is an option to include DATE/ TIME on still images. ❾➴ Date Imprinting
1. In any mode with the exception of Voice Recording mode, |
|
|
|
|
|
|
|
|
|
|
|
| |
press the MENU button. |
|
|
| 3072 |
| |
2. Press the LEFT/ RIGHT button and select the [SETUP] |
|
|
|
| ||
|
| SETUP | ||||
menu tab. |
|
| DATE&TIME |
| DATE | |
3. Select the [IMPRINT] menu by pressing the UP/ DOWN |
|
| DATE TYPE |
| D&TIME | |
|
|
| ||||
button and press the RIGHT button. |
|
| IMPRINT |
| OFF |
|
|
| BACK: |
| SET:OK | ||
|
|
|
| |||
4.Use the UP and DOWN buttons to select the desired date imprint type, and then press the OK button.
[DATE] | : Only the DATE will be imprinted on the image file. |
[D&TIME] | : The DATE & TIME will be imprinted on the image file. |
[OFF] | : The DATE & TIME will not be imprinted on the image file. |
5. Press the menu button twice and the menu will disappear.
INFORMATION
❾➴ The Date & Time are imprinted at the bottom right side of the still image. ❾➴ The date will be imprinted as a DATE TYPE setting.
❾➴ TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24 hour clock.
❾➴ The imprint function is applied only to still images.
Function lamp
❾✃ You can turn on and off the function lamp located on the front of the camera.
❾➴ Setting the function lamp
1.In any mode with the exception of Voice Recording mode, press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3.Select the [LAMP] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
If [ON] is selected : The function lamp will light up.
If [OFF] is selected : The function lamp will not light up.
5.Press the menu button twice and the menu will disappear.
3072
SETUP
DATE TYPE ON
IMPRINT OFF
LAMP
BACK:SET:OK
❾➓80❾➔