Using burst modes
It can be difficult to take photos of
• You can use the flash, timer, and ACB only when you select Single.
• When you select Motion Capture, the resolution is set to VGA and the ISO speed is set to Auto.
• Depending on the face detection option you selected, some burst options are not available.
1 | In Shooting mode, press [ | ]. |
2 | Select Shooting → Drive → an option. | |
Option Description
Single: Take a single photo.
Continuous:
•While you are pressing [Shutter], the camera takes
photos continuously.
•The maximum number of photos depends on the capacity of your memory card.
Motion Capture:
•While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30 photos).
AEB:
•Take 3 photos with different exposures: normal,
underexposed, and overexposed.
•Use a tripod to prevent blurry photos.
The options may differ depending on the shooting mode.
Shooting options 50