Special Effect : Preset focus frames
■You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus.
1. Press the E button in any recording mode |
|
|
| |
(except for MOVIE CLIP and AUTO mode). |
|
|
| |
2. Select the | menu tab by pressing the Left / |
|
|
|
Right button. |
|
|
|
|
3. Select a desired sub menu by pressing the Up / |
|
|
| |
| HighLight |
| ||
Down button and press the OK button. |
|
|
| |
|
|
|
HighLight | HighLight | HighLight | HighLight |
[Range 1] | [Range 2] | [Range 3] | [Range 4] |
4. The preset focus frame will appear.
Press the shutter button to capture an image
Capture:Shutter Edit:+/-
●Moving and changing the focus frame
You can change the focus frame after selecting a Range menu.
1.Point the camera towards the subject and compose the image by using the LCD monitor.
2.Press the + / - button.
3.The colour of focus frame turns white. Press the Up / Down / Left / Right button to move the focus frame position.
4.To select the focus frame position, press the + / - button again and you can take a picture.
Pressing the + / - button
Capture:Shutter | Edit:+/- | |
Capture:Shutter Move: |
[The frame is activated]
Pressing the
Up / Down / Left /
Right button
Pressing the + / - button
Capture:Shutter | Edit:+/- | |
Capture:Shutter Move: |
[After changing the frame position]
《26》