Before contacting a service centre
No image on external monitor
•The external monitor has not been connected properly with the camera
→Check the connection cables
•There are incorrect files in the memory card
→Insert a memory card that has correct files
When using the PC’s explorer, the [Removable Disk] file does not show
•Cable connection is incorrect
→Check the connection
•The camera is off
→Turn the camera on
•The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS 9.2 ~ 10.4. Alternatively the PC does not support USB.
→Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 9.2 ~ 10.4 to PC that
supports USB.
•The camera driver is not installed
→Install a [USB Storage Driver]
Specifications
■Image Sensor
-Type : 1/1.8" CCD
-Effective Pixel : Approx. 10.1
-Total Pixel : Approx. 10.3
■Lens
-Focal Length : SHD Lens f = 7.4 ~ 22.2mm (35mm film equivalent : 35 ~ 105mm)
-F No. : F2.8 ~ F7.1 (Wide), F5.1 ~ F13.1 (Tele)
-Digital Zoom :·Still Image mode : 1.0X ~ 5.0X
·Play mode : 1.0X ~ 14.3X (depends on image size)
■LCD Monitor : 2.7" color TFT LCD (230,000 dots)
■Focusing
-Type : TTL auto focus
-Range : ·Normal : 80cm ~ infinity
·Macro : 4cm ~ 80cm (Wide), 50cm ~ 80cm (Tele)
·Auto Macro : 4cm ~ Infinity (Wide), 50cm ~ Infinity (Tele)
■Shutter
-Speed : 1 ~ 1/1,500 sec. (Manual : 8 ~ 1/1,500 sec.)
■Exposure
-Control : ·Program AE
·Metering : Multi, Spot
-Compensation : ±2EV (0.5EV steps)
-ISO Equivalent : Auto, 80,100, 200, 400, 800, 1000
■Flash
-Modes : Auto, Auto &
-Range : Wide : 0.4m ~ 4.8m, Tele : 0.5m ~ 4.3m (ISO AUTO)
-Recharging Time : Approx. 5 sec.
■Sharpness : Soft, Normal, Vivid
■Effect : Normal, B&W, Sepia, Red, Blue, Green, Negative, RGB
■White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom
《65》