Caution
Contents
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury.
Leaking, overheating, or damaged battery could result in fire or injury.
-Use battery with the correct specification for the camera.-Do not short circuit, heat or dispose of battery in fire.-Do not insert the battery with the polarities reversed.Remove the battery when not planning to use the camera for a long period of time. Otherwise the battery may leak corrosive electrolyte and permanently damage the camera’s components.
Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after using it continuously. It may cause burns.
Do not move the camera while it is switched on, if you are using the AC adapter. After use, always switch off the camera before unplugging the cable from the wall socket. Then make sure that any connector cords or cables to other devices are disconnected before moving the camera. Failure to do so may damage the cords or cables and cause a fire or electric shock.
Take care not to touch the lens or lens cover to avoid taking an unclear image and possibly causing camera malfunction.
Avoid obstructing the lens or the flash when you capture an image.
When using this camera in low temperatures, you may experience the following. These are not camera malfunctions and usually recover at normal temperature.
-It takes longer to turn on the LCD monitor and the color may differ from the subject.
-When changing the composition, there may be an after image on the LCD monitor.Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip cards near the case.
Never connect the 20 pin connector to the USB port of a PC. This carries a high risk of computer malfunction.
READY
RECORDING
016Instructions on how to use the memory card
018When using the camera for the first time
019LCD monitor indicator020How to use the menu021Starting the recording mode021Selecting modes021How to use the Smart Auto mode023How to use the Program mode023How to use the DUAL IS (Dual Image Stabilization) mode024How to use the Scene modes026 How to use the Movie clip mode3