PictBridge : Reset
Important notes
Initializes
1.Use the Up / Down button to select the [Reset] menu tab. And then press the Right button.
2.Use the Up / Down button to select the desired sub menu, and then press the OK button.
Date | :Auto |
File Name | :Auto |
BackSet
This unit contains precision electronic components. Do not use or |
| store this unit in the following locations. |
- Areas exposed to severe changes in temperature and humidity. |
| - Areas exposed to dust and dirt. |
- Areas exposed to direct sunlight or the inside of a vehicle in hot |
| weather. |
- Environments where there is high magnetism or excessive vibration. |
If [Yes] is selected : All print and image settings will be reset.
If [No] is selected : Settings will not be reset.ÄDefault print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer.
- Areas with high explosives or highly flammable materials. |
Do not leave this camera in places subject to dust, chemicals (like |
naphthalene and mothballs), high temperature and high humidity. |
Keep this camera with silica gel in a hermetically sealed box when |
not planning to use the camera for a long period of time |
| Sand can be particularly troublesome to cameras. |
- Do not let sand get inside the camera when using it on beaches, |
coastal dunes, or other areas where there is lots of sand. |
- Doing so may result in failure or may permanently render the |
| camera unusable. |
| Handling the camera |
- Never drop the camera or subject it to severe shocks or vibrations. |
- Protect the large size LCD monitor from an impact. When this |
| camera is not used, keep it in the camera case. |
- Avoid obstructing the lens or the flash when you capture an image. |
| - This camera is not waterproof. |
To avoid dangerous electrical shocks, never hold or operate the |
| camera with wet hands. |
91