Samsung SMART CAMERA NX1000 Connecting to a WLAN and configuring network settings, Connecting to a WLAN

Wireless network

Connecting to a WLAN and configuring network settings

Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.

Connecting to a WLAN

1Rotate the mode dial to B.

2Select , , , or .

3Press [m], and then select Wi-Fi Setting.

•In some modes, press [m] or follow the on-screen instructions until the Wi-Fi Setting screen appears.

•The camera automatically searches for available AP devices.

4Select an AP.

Wi-Fi Setting

Refresh

Samsung 1

Samsung 2

Samsung 3

Samsung 4

Exit Manual

Icon/Option	Description
Refresh	Refresh connectable APs.
	Ad hoc AP
	Secured AP
	WPS AP
	Signal strength
WPS button connection	Connect to a WPS AP.
Add wireless network	Add an AP manually.

•Press [f] to open network setting options.

•When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 105)

•When a login page appears, refer to "Using the login browser". (p. 103)

•When you select an unsecured AP, the camera will connect to the WLAN.

•If you select a WPS profile supported AP, select WPS PIN connection, and then enter a PIN on the AP device. You can also connect to a WPS profile supported AP by selecting WPS button connection on the camera, and then pushing the WPS button on the AP device.

101