Samsung HT-C5500 Installing the Speakers on the Tallboy Stand, Connecting The Speakers, In case of HT-C5500, English

Installing the Speakers on the Tallboy Stand

Connections 02

* HT-C5530 only - Front Speakers

* HT-C5550 only - Front/Surround speakers

1. Turn the Stand Base upside-down and

1

2

	connect it to the Stand.
2.	Insert four small screws clockwise into the four
	holes marked using a screwdriver as shown in the
	illustration.
3.	Connect the upper Speaker to the assembled
	Stand.
4.	Insert another large screw clockwise into
	the hole on the rear of the speaker using a
	screwdriver.

3

Stand

Base

Stand

Speaker

Stand

4

Connecting The Speakers

1. Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

3. Connect the connecting plugs to the back of the product by matching	Black	Red
the colours of the speaker plugs to the speaker jacks.

In case of HT-C5500

Centre Speaker	Front Speaker (L)
Front Speaker (R)	Subwoofer
	SPEAKER IMPEDANCE : 3
Surround Speaker (R)	Surround Speaker (L)
	FM ANT

iPod

SPEAKER IMPEDANCE : 3

* Refer to page 18 for the speakers of HT-C5530/C5550.

English 19