Samsung HT-C5500 In Case of HT-C5500, 20 English, Connecting the Optional Wireless Receiver Module, Connections

Connections

Connecting the Optional Wireless Receiver Module

To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer.

● This product should be connected with the SWA-5000 only.

In Case of HT-C5500

Centre Speaker Front Speaker (L)

Front Speaker (R)

Subwoofer

SPEAKER IMPEDANCE : 3

Surround	Surround
Speaker (L)	Speaker (R)

FM ANT

iPod

SPEAKER IMPEDANCE : 3

Wireless Receiver Module

* Refer to page 18 for the speakers of HT-C5530/C5550.

1. Press down the terminal tab on the back of the speaker.

2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.

4.With the product turned off, insert the TX card into the

TX Card Connection (WIRELESS) on the back of the product.

• Hold the TX card so that the label "WIRELESS" faces upward and insert the card into the port.

• The TX card enables communication between the product and the wireless receiver module.

5. Connect the left and right surround speakers to the wireless Receiver module.

6.Plug the power cord of the wireless Receiver module in the wall

outlet .

BlackRed

WIRELESS

TX card

20 English