Samsung HT-D5300 HT-D5300/ZA OPTICAL : Connecting an External Digital Component, AUX : Connecting an External Analog Component, Connecting Audio from External Components, Red, VCR, AUX

Connecting Audio from External Components

	FM ANT	COMPONENT OUT
DIGITAL	HDMI OUT
AUDIO IN
OPTICAL
	WIRELESS	AUX IN	VIDEO OUT

Optical Cable		Red	White
(not supplied)
	Audio Cable
	(not supplied)
	If the external analog
	component has only one
Set-Top Box	Audio Out, connect either	VCR
	left or right.
OPTICAL		AUX

Connections 02

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component.

2.Press the FUNCTION button to select D. IN input.•The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  FM

✎NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.

This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.

AUX : Connecting an External Analog Component

Analog signal components such as a VCR.

1.Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.

•Be sure to match connector colors.2.Press the FUNCTION button to select AUX input.

•The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  W. IPOD  FM

✎NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

English 25

HT-D5300_XAA_1226.indd 25 2011-12-26 ￿￿ 11:39:37