Listening to the Radio
You can listen to the chosen band (FM, MW or LW broadcast stations) by using either the automatic tuning or manual tuning operation.
B
Presetting stations
You can store up to:
15 FM stations | • FM | Frequency Modulation | |
8 | MW stations | • AM(MW) | Medium Wave |
7 | LW stations | • LW | Long Wave |
GB
Example: Presetting FM 89.1 in the memory
Remote
Control
Unit
1
Press the Tuner(Band) button.
2
Select a broadcast station.
1 | 2 | 3 |
|
Press the Tuner(Band) button | Select the MANUAL by | Use the ▲▲ | and▲▲ |
and select the FM band. | pressing the Stop ( ) | button to tune into 89.1 |
•The selection toggles back and forth between "FM" "MW" and "LW" each time the Tuner(Band) button is pressed.
Auto Station 1
Auto Station 2
Manual Station
When the
Hold in the
Press the
button on the main unit. |
•The selection toggles back and forth between "
| MHZ |
|
|
| MHZ |
L | R | L | R | L | R |
|
|
|
|
|
|
Main Unit
1
Press the Function button to select the desired band (FM, MW or LW).
2
Select a broadcast station.
Auto Station 1 Press the | button to select the PRESET mode. | ||
Then press the |
|
| button to select a station |
stored in the preset
4
Press the Program button.
5
Use the ▲▲ | and▲▲ |
button to select FM2.
6
Press the Program button.
•The preset stations operation is completed.
Auto Station 2
Manual Station
Audio
MO/ST
Press the Stop (
Press the Stop (
front panel. Press the
| PROGRAM | MHZ |
| PROGRAM | MHZ |
| MHZ |
L | R |
| L | R |
| L | R |
•When using this feature for the first time, be sure to store the station in the preset memory at FM1 as the unit does not come preprogrammed with default presets.
To change the Preset StationsTo store other Channels• | Store the changes while repeating | Repeat steps 3 to 4 above. |
| ||
| steps 1 to 4 above. |
|
•The selection toggles back and forth between “STEREO” and “MONO” each time the MO/ST button is pressed.
•In a poor reception areas, select Mono mode for a clear,
35
36