Samsung HTDL200RH/ELS Listening on headphones, TV System Selection, Before Using the DVD Player

Connecting your System to the Power Supply

B

The main lead must be plugged into an appropriate socket.

Before plugging your system into a main socket, you must check the voltage.

1.Plug the main lead (marked AC Cord on the rear of the system) into an appropriate socket.

2.Press the On/Standby button to switch your DVD Player system on.

				AV OUT	VIDEO	S-VIDEO
					Y/C
	SPEAKERS		SPEAKERS
						ANTENNA
R-REAR-L	WOOFER	CENTER	R-FRONT-L		COMP.
			AUX1ININ	AUX2 IN		AM
					VIDEO OUT

LL

RR

6	3	6	6
	IMPEDENCE		IMPEDENCE

Listening on headphones

Use headphones for private listening pleasure (not supplied).

Connect the headphones to the HEADPHONES jack of the front panel.

•No sound is produced from the speakers.

•To prevent hearing damage, do not raise the volume level excessively when using headphones.

Volume

V I D E O

Function

Phones

HEADPHONE jack

13

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.

User instructions may vary depending on the type of disc. Read the instructions carefully before use.

	1	2	3	GB
	Turn on the power	Select a video mode by	Press the DVD button
Prepe-	to your DVD player	pressing the TV/VIDEO	to select the DVD input
rations	and TV.	button.	function.
before	TV	TV/VIDEO	DVD
use

• The “WAIT” message that appears on the display for about seven to eight seconds when turning on the power or selecting a DVD function indicates a stabilization period for optimizing the condition of your DVD player. While the message is being displayed, other buttons remain inactive.

•When the power is not turned on, press down the Stop ( ) button on the main unit for over 5 seconds.

The inside of the product will be initialized to its optimum state.

•If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 28.

	TV System
TV System Selection	Zoom

Press the TV System button while in stop mode.

•Each time the TV System button is pressed, “NTSC, PAL” are selected in this order.

Different countries use different types of TV broadcast systems, video, audio and channel systems.

Example : The player cannot playback PAL-encoded DVD with NTSC-TV.

CD-R/RW playback compatibility

•Your DVD player can also play CD-R and CD-RW discs recorded in digital audio format. When recording your own CD-R or CD-RW discs, make sure that the recording session is properly terminated, or they will not be playable. (Depending on disc properties and recording quality, some CD-R/RW may not be playable.)

•CD-RW has a lower reflection rate than CD-R media and consequently it will take a longer to read CD-R discs.

•CD-RW discs recorded at high speed tend to be difficult for the DVD player to read. If the recording speed for the CD-RW disc is not predetermined, write it at low speed.

14