Connecting an External Digital Component
Example: Digital signal components such as a
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
CENTER
SUBWOOFER
Optical Cable (not included)
DIGITAL OUT
1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 Press AUX on the remote control to select ‘DIGITAL IN’.•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
IMPEDANCE SUBWOOFER : 4Ω
FRONT / CENTER / REAR : 4Ω
CENTER
SUBWOOFER
Audio Cable
If the external analog
component has only one Audio Out, connect either left or right.
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX on the remote control to select AUX 1 or AUX 2.• Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
CONNECTIONS
15 | 16 |