Samsung HT-E355 Speaker Components, Assembled Speakers, Installing the Speakers on the Tallboy Stand, Connections, Speaker Components, 14 English

Connections

Speaker Components

HT-E350

(L) (R) (L) (R)

FRONTSURROUNDCENTERSUBWOOFER

Speaker Components		Assembled Speakers
HT-E355		HT-E355
(L) (R)	SPEAKER CABLE
	SCREW (5×15): 16EA
FRONT	STAND		CENTER SPEAKER
(L) (R)	CENTER
		FRONT	SURROUND SUBWOOFER
SURROUND	STAND BASE SUBWOOFER	SPEAKER	SPEAKER

Installing the Speakers on the Tallboy Stand

*HT-E355 - Front/Surround Speakers

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert three screws (5*15, For connecting Stand & Stand Base) clockwise into the three holes marked using a screwdriver as shown in the

illustration.

!!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 7 kg.f.cm)

3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

6.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

1 Stand Base 2

Stand

34

Speaker

Stand

56

14 English