Setup
Speaker Selection
The audio signals transmitted over the HDMI Cable can be changed Home Theater/TV Speaker.
•Home Theater : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
•TV Speaker : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
✎✎NOTE
`` The default setting of this function is Home Theater .
`` HDMI Audio is automatically
`` When TV Selection is set to TV Speaker, PL II / DSP EQ/P.BASS/GIGA/S.VOL doesn't work.
`` With Speaker Selection set to 'TV Speaker', the volume can be adjusted only using the TV remote control.
User EQ
You can configure the equalizer settings manually to your preference.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
Audio Return Ch.
You can enjoy TV sound from the Home Cinema speakers by using just one HDMI cable.
•Off : Turn the Audio Return Channel function off.
•Auto : Listen to TV sound from the Home Cinema speakers if your TV is compatible with the Audio Return Channel function.
✎✎NOTE
`` When Anynet+
`` Using an ARC (Audio Return Channel)- uncertified HDMI cable may cause a problem in compatibility.
`` ARC function is only available if an ARC- compliant TV is connected.
System
Initial Settings
By using the Initial Settings, you can set the language and TV aspect .
✎✎NOTE
`` If an HDMI cable is connected to the product, the TV aspect does not appear and it is set to 16:9 Wide automatically.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.
✎✎NOTE
`` This option is not activated if you select OK.To activate this option, please activate the DivX(R) Deactivation.
`` Even after you reset the system, the settings of DivX Registration will not be reset.
DivX(R) Deactivation
Select this to get a new registration code.