Samsung HT-E5500/EN, HT-E5500/XE, HT-E5500/XN, HT-E5500/ZF, HT-E5530/EN, HT-E5530/XE, HT-E5530/XN, HT-E5530/ZF, HT-E5550/EN, HT-E5550/TK, HT-E5550/XE, HT-E5550/ZF Installing the Speakers on the Tallboy Stand, Connecting The Speakers, Connections, English 17 |, on the 3 marked holes, connect it to the Stand

Installing the Speakers on the Tallboy Stand

*HT-E5530 only - Front Speakers*HT-E5550 only - Front/Surround Speakers1.Turn the Stand Base upside-down and

connect it to the Stand.	1	Stand Base	2

2.Use the driver to combine the screws (5x20)on the 3 marked holes.

Stand

Connections 03

3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert a screw (5x15) clockwise into the hole on the rear of the speaker using a screwdriver.

And then connect a speaker cable.6.This is the appearance after the speaker is installed.Follow this steps to install other speaker.

Speaker

Stand

1.Match each speaker cable bundle to the correct speaker by matching the

colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.

2.To attach speaker wire to each speaker:

a. Press down the red tab on the back of the speaker, insert the red wire,	Black	Red
and then release the tab.

b. Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.

3.Connect the speaker wire plugs to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.

English 17