Samsung HT-E5500 Connecting to a Network Router, Wireless Network, Wired Network, modem, Router, service, service, | NOTE |, | NOTE |, Broadband, Broadband, Broadband

Connecting to a Network Router Wireless Network

You can connect your product to your network router using one of the methods illustrated below.

Wired Network

Broadband modem(with integrated router)Broadbandservice

Or

Router

Broadband service

Broadband

modem

NOTE

Internet access to Samsung’s Software Update server may not be allowed, depending on the router you use or your ISP’s policy. For more information, contact your ISP (Internet Service Provider).

DSL users, please use a router to make a network connection.

To use the AllShare Play function, you must connect your PC to your network as shown in the illustrations on the left.

The connection can be wired or wireless.

Wireless IP sharer

Broadband

service

NOTE

If your wireless IP router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.

Set your wireless IP router to Infrastructure mode. Ad-hoc mode is not supported.

The product supports only the following wireless security key protocols:-WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

Select a channel on the wireless IP router that is not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure.

If you select the Pure High-throughput (Greenfield) 802.11n mode and set the Encryption type on your router or AP to WEP, TKIP or TKIP-AES (WPS2Mixed), the product will not support a connection in compliance with new Wi- Fi certification specifications.

Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).

English 23

Connections 03

HT-E5500_XU_0223.indd 23 2012-02-23 오후 2:23:06