Attaching the Toroidal Ferrite Core
For Power Cord/HDMI Cable/LAN Cable
03
If you attach a Toroidal ferrite core to the power cord of the main unit, it will help to prevent RF interference from radio signals.
1.Pull the fixing tab of the Toroidal ferrite core to open it.
2.Make a loop twice in the main unit power cord.
3.Attach the toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.
Method for connecting toroidal ferrite core to HDMI cable and LAN cable is same as steps
NOTE
Attach the ferrite core to the main unit as close as possible.
Power Cord
< In case of Power Cord >
Connections
For Speaker Cable
1.Open the toroidal ferrite core by pulling the lock
lever.
2. Arrange up all the speaker cables that are connected to the main unit and make two loops.
3. Attach the toroidal ferrite core to the main unit power cord as the figure shows and press it until it clicks.
4. Cover the speaker cables with the toroidal ferrite core as shown and colse it until you hear a click.
NOTE
Attach the ferrite core to the main unit as close as possible.