5 · You have three ways to complete the Wi-Fi connection:
•Through the Wi-Fi device.
•Through the product using PBC.
•Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1 · On the
2 · When you have completed the procedure, you should see a
3 · The Connecting
Through the Product Using PBC
1 · Select the
2 · Select PBC, and then press the E button. The PBC pop-up appears.
3 · Press the PBC button on the Wi-Fi Direct device within 2 minutes.
4 · The Connecting
Through the Product Using a PIN
1 · Select the
2 · Select PIN, and then press the E button. The PIN pop-up appears.
3 · Note the PIN code in the
4 · The Connecting
NOTE
The wired or wireless network connection will be disconnected when you use the
Soft AP
Soft AP lets you connect other
It requires that you create a security key which you must enter into the other
1 · In the Home screen, select Settings, and then press the E button.
2 · Select Network, and then press the E button.
3 · Select Soft AP, and then press the E button.
4 · Select On or Off, and then press the E button.
< To Set the Soft AP Security Key >
1 · On the Soft AP screen, select Security Key, and then press the E button. The Security Key screen appears.
2 · On the Security key screen, enter a security key. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.
3 · When done, use the ▲▼◄► buttons to move to DONE at the bottom of the screen, and then press the E button.
When you connect a
AllShare Settings
The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the product, deny access, or delete the device from the AllShare list.
1 · In the Home screen, select Settings, and then press the E button.
2 · Select Network, and then press the E button.
English 33
Settings 04