Getting Started
Installing the Product
You can install your product on a stand or hang it on the wall. When installing the product, please make sure that enough space is left to insert a disc. If you do not, product will not operate normally.
Installation Precautions
•If you install your product on a wall, the wall must be flat and vertical.
•Avoid installing the product in areas with high temperature or humidity, or on a wall that cannot sustain the weight of the set.
•Check the strength of the wall. If the strength of the wall is insufficient to support the product, make sure to reinforce the wall before installing.
•Check the compostion of the wall. If the wall is made of plaster board, marble, or iron board, purchase and use the appropriate mollies and fixing screws.
•Connect all cables from external devices (TV, etc.) to the product before you install it.
•If you are installing the product onto plasterboard (dry wall), we recommend locating a stud behind the wall and screwing the support screws into the stud.
•To prevent electric shock, be sure to turn off the product before you install it.
•Do not hang on the installed product and avoid hitting it.
•Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in injury or in damage to the product.
•If you install the product on a wall, please make sure that a child does not pull any of connecting cables, as it may cause the product to fall.
Case 1 : Installing on the Stand
To install on the Stand, insert the Stand Holder into the bottom slot of the product.
Case 2 : Installing on a Wall
1.Insert the