Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 TUNER
R | Red |
|
| R | W |
|
|
| White |
|
|
|
| ||
W |
|
|
| AUX IN |
|
| |
|
|
|
|
| FM ANT | DIGITAL | ONLY FOR |
| FRONT |
|
|
|
| AUDIO IN | UPDATE |
|
|
|
|
|
| (OPTICAL) |
|
| HDMI OUT | HDMI IN 1 | HDMI IN 2 | SYSTEM CABLE |
|
|
|
| FRONT |
|
|
|
|
|
|
| SPEAKERS OUT |
|
|
|
|
|
|
| SPEAKER IMPEDANCE : 3 |
|
|
|
|
|
|
Method 1 | Method 2 | Method 3 |
(Cable not supplied.) | (Cable not | (Cable not |
| supplied.) | supplied.) |
|
| R W |
HDMI OUT | OPTICAL OUT | AUDIO OUT |
External Devices |
|
|
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the subwoofer to the HDMI OUT jack on your digital device. Select the HDMI1 or HDMI2 mode.
Method 2 OPTICAL : Connecting an External Digital Audio ComponentTo connect the digital audio output of digital signal components such as Cable Boxes and Satellite Receivers
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the subwoofer to the Digital Optical Out jack of the external digital device using a digital optical cable.
Select the D. IN mode.Method 3 AUX IN : Connecting an External Analogue ComponentUsing an RCA audio cable (not supplied), connect the AUDIO In jack on the subwoofer to the AUDIO Out jack on the external analogue component. Select the AUX mode.
•Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
NOTE
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
English 23Connections 03