| AUX1 : Side Panel | AUX2 : Rear Panel |
Audio Cable
(not supplied)(not supplied)If the external analog component has only one Audio Out,
connect either left or right.
AUX1 : Connecting an External Analog Component
Analog signal components such as an MP3 Player
1 Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external analog component.
2 Press the AUX button on the remote control to select <AUX1> input.■You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
■Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX2> input.■You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
•You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
GB
OPTICAL : Rear Panel| Optical Cable | CONNECTIONS |
| |
(not supplied) |
|
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital com- ponent.
2 Press the AUX button on the remote control to select <D.IN>.■You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD ➝ D.IN ➝ AUX 1 ➝ AUX 2 ➝ USB ➝ FM.
18 | 19 |