Samsung HT-X200R/XEF, HT-X200R/XEO, HT-X200R/XET, HT-X200T/MEA Listening to Radio, Setting the HDMI Audio, MISCELLANEOUS, Settings (Con’t), MENU, EXIT, TUNER, ENTER, ENTER, MO/ST, RETURN, Main Unit, <HDMI AUDIO

Settings (Con’t)

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.

Listening to Radio

Remote Control1 Press the TUNER button to select the FM band.2 Tune in to the desired station.

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

1	In Stop mode, press the MENU button.
2	Press the Cursor	button to move to <Audio> and then press the ENTER button.
3	Press the Cursor	button to move to <HDMI AUDIO> and then press the
	ENTER button.
4	Press the Cursor	, button to select <ON> or <OFF> and then press the
	ENTER button.

•ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

•OFF : Video is transmitted over the HDMI connection cable only, and audio is output through the home theater speakers only.

• The default setting of this function is HDMI AUDIO OFF.

• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.

Automatic Tuning 1 : When the button is pressed, a preset broadcast station is select-

ed.

Automatic Tuning 2 : Press and hold the , button to automatically search for active broadcasting stations.

Manual Tuning : Briefly press the , button to increase or decrease the frequency incrementally.

Main Unit1 Press the FUNCTION button to select the FM band.2 Select a broadcast station.

Automatic Tuning 1 : Press the STOP ( ) button to select <PRESET> and then press the button to select the preset station.

Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold

the button to automatically search the band.

Manual Tuning : Press the STOP ( ) button to select <MANUAL> and then briefly press the button to tune in to a lower or higher frequency.

Press the MO/ST button to listen in Mono/Stereo.

Press the RETURN button to return to the previous level. Press the EXIT button to exit the setup screen.

Each time the button is pressed, the sound switches between (STEREO) and (MONO).

In a poor reception area, select (MONO) for a clear, interference-free broadcast.