Setup
SETTING THE TEST TONE
Use the test tone to check the speaker connection status or level.
1.Press the SETUP/MENU button.
•Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2.Press the ENTER button to select SETUP ENTER.
3.Press the ▲▼ buttons to select TEST TONE, and then press the ENTER or ► button.
4.Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button.
•AUTO : Test signal will be automatically output as follows; F.L CEN
S.W F.R S.R S.L.
-During test tone output, press the ▲▼ buttons to adjust the speaker output level from
•MANUAL : Enables you to adjust the output level of the speaker manually.
1) Press the ENTER button to select the speaker you want.
Each time you press the ENTER button, F.L CEN S.W F.R S.R S.L will be selected in turn.
2)Press the ▲▼ buttons to set the Test Tone mode you want.
You can adjust the speaker output level from
- Test Tone Output - |
|
• F.L (front left) : | • F.R (front right) : |
• CEN (centre) : | • S.R (surround right) : |
• S.W (subwoofer) : | • S L (surround left) : |
- To stop test tone -
•Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
36