DRC SETUP
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder.
1. Press the SETUP/MENU button.
• Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2. | Press the ENTER button to select SETUP ENTER. | |
3. | Press the ▲▼ buttons to select DRC SETUP, and then press the |
|
| ENTER or ► button. |
|
4. Press the ▲▼ buttons to set the DRC Setup mode you want.
•STD : Sets DRC effect to standard. • MAX : Sets DRC effect to maximum.
•MIN : Sets DRC effect to minimum.
HDMI SETUP
Use this if you want to receive audio from HDMI connected external devices.
1.Press the SETUP/MENU button.
•Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2.Press the ENTER button to select SETUP ENTER.
3.Press the ▲▼ buttons to select HDMI SETUP, and then press the ENTER or ► button.
4.Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button.
5.Press the ▲▼ buttons to set the HDMI Setup mode you want.
•HDMI AUDIO : AVR(Audio Video Receiver), TV
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT.
If you want to listen to audio from an HDMI connected external device through your HDMI connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V receiver.
- AVR : HDMI audio is not output | - TV : HDMI audio is output |
•HDMI ANYNET+ : ON, OFF
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control.
- ON : Anynet+ is enabled. | - OFF : Anynet+ is disabled. |
•HDMI SYNC : ON, OFF
The AV receiver can be set to automatically correct any delay between the video and the audio, based on the data from the connected TV.
- ON : HDMI Sync is enabled. | - OFF : HDMI Sync is disabled |
M HDMI Audio is enabled only if both the HDMI INPUT and HDMI OUT are connected properly and working normally. This function works only if your
VARIABLE SET (Low Power Consumption SETUP)
This function enhances electric power efficiency using the variable power with output power.
1.Press the SETUP/MENU button.
•Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF.
2.Press the ENTER button to select SETUP ENTER.
3.Press the ▲▼ buttons to select VARIABLE SET, and then press the ENTER or ► button.
4.Press the ▲▼ buttons to select ON or OFF.
•ON :This is Samsung's electric power efficiency function, you can save about 30 % for power consumption.
•OFF: Normal power efficiency function.
M This function is not available after the Tone Control, Speaker Level, SFE mode or ASC is changed from the factory setting.
41
ENG
SETUP ●