Samsung 130W 2.1-Kanal Flat SoundbarHW-K360 HW-K360/EN, HW-K360/XN, HW-K360/ZF, HW-K369/XE Power, Volume, Skip Back, DESCRIPTIONS, Play / Pause, SOUND CONTROL, SOUND CONTROL

DESCRIPTIONS

Power

Turns the Soundbar on and off.

Volume

Adjusts the volume level of the unit.

Play / Pause

Press the p button to pause a file temporarily.

Press the p button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press the [ button, the previous file is selected.

SOUND CONTROL Press to select TREBLE, BASS, SUBWOOFER LEVEL, AUDIO SYNC, REAR SPEAKER, or REAR LEVEL.

Then, use the ,  buttons to adjust the Treble or Bass volume from -6 ~ +6,

SUBWOOFER LEVEL volume from -12, -6 ~ +6.

Press and hold the SOUND CONTROL button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz, 5KHz and 10KHz are selectable and each can be adjusted to a setting between -6 and +6.

• To adjust the woofer level using the Samsung Audio Remote mobile app, press the [, ] buttons to decrease or increase the woofer level within 3 seconds of pressing the WOOFER button.

If the Soundbar is connected to a digital TV and the video appears out of sync

with the audio, press the SOUND CONTROL button to select AUDIO SYNC to sync the audio with the video. Use the ,  buttons to set the audio delay

between 0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync function is not available.

To control the volume of the rear speaker sound, select REAR SPEAKER in Sound Control, and then use the ,  buttons to toggle the rear volume between OFF-RS and ON-RS.

To control the volume of the rear level sound, select REAR LEVEL in Sound Control, and then adjust the volume between RS -6~+6 using the ,  buttons.

•The REAR SPEAKER and the REAR LEVEL mode are only available when you connect the SWA-8000S (sold separately).

10