Samsung 130W 2.1-Kanal Flat SoundbarHW-K360 HW-K360/EN, HW-K360/XN, HW-K360/ZF, HW-K369/XE ++Controlling the Soundbar using Your TV Remote Control, INSTALLATION, ENG, INSTALLING THE BATTERY IN THE REMOTE CONTROL

INSTALLATION

++Controlling the Soundbar using Your TV Remote Control

1.Press and hold the SOUND button for more than 5 seconds while the Soundbar is turned on.

2."ON - TV REMOTE" appears on the Soundbar's display.

3.In the TV's menu, set the TV speaker to external speaker.

●● TV menus differ by manufacturer and model. Refer to the TV's user manual for further information. ●● Only the VOLUME +/- and the MUTE buttons will be available to control the Soundbar.

●● This function is not available when the Soundbar is in the TV SoundConnect mode. ●● Manufacturers supporting this function:

- VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, GRUNDIG, Hisense, RCA

- This function may not be compatible with your TV's remote depending on the remote control's manufacturer. ●● To turn off this function, press the SOUND button for 5 seconds. "OFF - TV REMOTE" appears on the

Soundbar's display.

ENG

INSTALLING THE BATTERY IN THE REMOTE CONTROL

1.Use a suitable coin to turn the remote control's battery cover counterclockwise to remove it as shown in the figure above.

2.Insert a 3V lithium battery. Keep the positive (+) pole facing up when inserting the battery. Put the battery cover on and align the '●' marks side by side as shown in the figure above.

3.Use a suitable coin to turn the remote control battery cover clockwise as far as it will go to fix it in place.

11