Samsung 400UXN-3 MagicInfo, Multi Control, Available Modes, •TV, •AV, Note, Manual, Gateway, Gateway, RJ45 MDC, MagicInfo, •ID Setup, •ID Input, •MagicInfo, RS232C MDC

Adjusting the LCD Display

• MagicInfo

• TV

Note

•A TV tuner box (sold separately) must be connected to use the TV. (US Only)

•For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is connected.

Multi Control

Assigns an individual ID to the SET.

•ID Setup

Assigns distinctive IDs to the SET.

•ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated.

•MDC Connection

Selects a port to receive the MDC inputs from.

•Communicates with the MDC via a RS232C MDC cable.

•Communicates with the MDC via an RJ45 MDC cable.

•Network Setting•IP Setting : Manual, Auto•IP Address : Manually enter the IP Address if IP Setting is set to Manual.•Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.

•Gateway : Manually enter the Gateway if IP Setting is set to Manual.

MagicInfo

Available Modes

• PC / DVI / DisplayPort

• AV