MDC Program Installation/Uninstallation

Installation

1Insert the installation CD into the CD-ROM drive.

2Click the MDC Unified installation program.

If a software installation window is not displayed on the main screen, install with the "MDC Unified"

execution file in the MDC folder on the CD.

3Click "Next" in the displayed Installation Wizard screen.

4In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".

5In the displayed "Customer Information" window, fill out all the information fields and click "Next".

6In the displayed "Destination Folder" window, select the directory path you want to install the program in and click "Next".

If the directory path is not specified, the program will be installed in the default directory path.

7In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install".

8

9

Installation progress will be displayed.

Click "Finish" in the displayed "InstallShield Wizard Complete" window.

Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.

10The MDC Unified shortcut icon will be created on the desktop after installation.

The MDC execution icon may not be displayed depending on the PC system or product specifications.

Press F5 if the execution icon is not displayed.

Uninstallation

1

2

Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.

Select MDC Unified from the list and click Change/Remove.

MDC installation can be affected by the graphics card, mother board and network conditions.