Extron electronic manual Completing the Installation, SF 228T Speaker System Installation

Completing the Installation

NOTE: Observe all applicable building codes and local ordinances when installing the speaker.

1.For installation in a 2 feet x 2 feet ceiling tile, remove a tile and place the speaker on the existing support rails as shown below.

Extron

SF 228T

Two-way Ceiling

Speakers

2' x 2' Ceiling Tile

Ceiling Tile

Rails

Figure 12. 2 Feet x 2 Feet Ceiling Tile Installation

For installation in a 2 feet x 4 feet ceiling tile, remove a tile and cut the tile in half. Install the supplied T-rail crosspiece, then replace the half-tile as shown below.

Extron

SF 228T

Two-way Ceiling

Speakers

2' x 4' Ceiling Tile

Existing Ceiling Tile Rails

T-rail Crosspiece (supplied)

Figure 13. 2 Feet x 4 Feet Ceiling Tile Installation

Set the speaker in place in the ceiling and position it so the speaker edges are hidden by the existing rails or T-rails.

SF 228T Speaker System • Installation 9