Introduction
•Do not use screws that are longer than the stand- ard length or do not comply with the VESA stand- ard screw specifications. Screws that are too long may cause damage to the inside of the prod- uct.
•For wall mounts that do not comply with the VE- SA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
•Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
•Samsung is not liable for product damage or per- sonal injury when a
•Do not mount the product at more than a 15 de- gree tilt.
•Always have two people mount the product on a wall.
Model | VESA screw hole specs (A * | Standard | Quantity | |
B) in millimeters | Screw | |||
|
| |||
|
|
|
| |
600 mm x 400 mm | M8 | 4EA | ||
|
|
|
| |
600 mm x 400 mm | M8 | 4EA | ||
|
|
|
|
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
Remote Control (RS232C)
Cable connections
interface | RS232C(9 pin) |
|
|
pin | TxD(No.2) RxD(No.3) GND(No.5) |
|
|
Bits rate | 9600 bps |
|
|
Data Bits | 8 bit |
|
|
Parity | None |
|
|
Stop Bits | 1 bit |
|
|
Flow control | None |
|
|
Maximum length | 15 m (only shielded type) |
|
|
•Pin assignment