Connection Using an IR Stereo Cable (sold |
| 1 | 2 |
separately) |
|
|
|
――The DBE and DM32E models do not support the IR OUT port. |
|
|
|
Make sure to connect the External ambient sensor while the product is powered |
|
|
|
off. Then, power on the product. | IR OUT |
| IR / AMBIENT |
|
|
|
|
|
| SENSOR IN |
|
|
|
| |
Controlling more than one display product using |
| |||
|
|
| ||
your remote control |
|
|
| |
•• Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN |
|
| ||
port on the other display product using the dedicated stereo cable. |
|
| ||
•• A command sent from the remote control pointed at product 1 will be |
|
| ||
received by both display products 1 and 2 . |
|
| ||
――The appearance may differ depending on the product.
Controlling more than one display product using an External ambient sensor (sold separately)
•• A command sent from the remote control pointed at product 1 (to which the External ambient sensor is connected) will be received by both display products 1 and 2 .
――The appearance may differ depending on the product.
1 | 2 |
IR / AMBIENT |
|
SENSOR IN | IR / AMBIENT |
IR OUT | |
| SENSOR IN |
POWER
SOURCE
25