Samsung SMART Signage TV RH48E LED LH48RHEELGW/EN, LH55RHEELGW/EN, LH55RHEELGW/XE Broadcasting, Auto Tuning, Auto Tuning, Broadcasting, Auto Tuning, AerialTerrestrial

Chapter 08

Broadcasting

Configure the Broadcasting settings for the product. Available in TV mode only.

Auto Tuning

MENU m →Broadcasting →Auto Tuning →ENTER E

Broadcasting

Auto Tuning

AerialTerrestrial

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

-- The displayed image may differ depending on the model.

-- Available in TV mode only.

The Auto Tuning function memorizes all channels that are available over the aerial or through your cable system and adds them to the Channel List.

To start Auto Tuning, follow these steps:

Auto Tuning

To start Auto Tuning, follow these steps:

1 Push MENU m →Broadcasting →Auto Tuning →Auto Tuning →ENTER E on your remote. The Auto Tuning screen appears.

2 On the Auto Tuning screen, select the source of your product signal.

――Terrestrial: If your product is connected to an antenna choose Terrestrial, and then press ENTER E. The product will automatically start memorizing channels.

――Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3. ――Select Digital & Analogue, Digital or Analogue to scan for channels.

3 Sets Search Mode using/buttons. When done, select Scan, and then press ENTER E. The product will start memorizing channels.

――Channel memorization can take up to 45 minutes, depending on your cable system.

――Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel buttons on your remote.

84