Samsung MAX-DN83 MAXDN83RH/ELS, MAXDN87RH/ELS Listening to a Cassette, CD Synchro Record Feature

		Listening to a Cassette
	GB
			Always treat your cassettes with care; refer, if necessary, to
			the section entitled “Precautions When Using Audio Cassettes”
			on page 35.
1			Switch the system on by pressing the On/Standby button.
2			Select the TAPE function by pressing TAPE on the front panel.
3			Open either cassette deck 1 or 2 by pushing and releasing the deck
4			cover where PUSH EJECT (		) is written.
			Insert the pre-recorded cassette with the open edge of the tape
			facing downward.
5			Close the deck by pushing on it until it clicks into place.
			Result: Depending on the deck selected, the 1 or 2 indication is
			displayed in front of the counter number.
			If you insert a cassette in both decks, the system selects the
			deck in which you inserted the second cassette.
6			If you have inserted two cassettes, press Deck 1/2 on the front panel
			or directly the Deck 1/2 button on the remote control to select the
			cassette to be played.
			Result: Depending on the deck selected, the TAPE 1 or TAPE 2
			indication is displayed.
7
			To listen to...	Press ...
			Side A	TAPE (	)	DECK 1 and DECK 2
			Side B	TAPE (	)	DECK 2 only
			Result: The cassette starts playing.
8			When the cassette is stopped, select one of the following functions
			as required.
			Main Unit
			To...			Press ...
			Rewind the cassette
			Fast-forward the cassette
			Remote Control
			To...			Press ...
			Rewind the cassette
			Fast-forward the cassette

On/Standby	Demo
	Timer/
	Clock

1	Display		Band
		R		2,7
	RDS
	PTY		TUNER	DVD/CD	TAPE
	Mono/ST.	Down	Tuning Mode	Up	M
	Display	8 CounterReset
			Memory	REV.Mode
				8
	Enter
		Deck 1/2	Dubbing
Phones		6
			Normal	High
		CD Synchro	REC/Pause	Record Lock

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:

Synchronised recording

Direct recording

This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.

1	Switch the system on by pressing On/Standby.
2	Insert a blank cassette in Deck 2.
3	Select the DVD/CD function by pressing DVD/CD on the front panel.
4	Load a compact disc.
5	Select the required disc.
6	Select the required track and press CD Synchro or press CD
	Synchro directly to start recording at the beginning of the disc.
	Result: REC is displayed and recording starts.
7
	To stop...	Press ...
	Recording and playing the compact disc

The function of CD Synchro is operated in only CD.

On/Standby	Demo
	Timer/
	Clock
1	Display	R	Band	3
	RDS
	PTY		TUNER	DVD/CD	TAPE	AUX
		Down	7	Up
	Mono/ST.					Multi Jo
	Display
		Counter	Memory	REV.Mode
		Reset
	Enter
		Deck 1/2	Dubbing
Phones		CD Synchro6
			Normal	High
			REC/Pause	Record Lock

28