Samsung MAX-DN83 MAXDN83RH/ELS, MAXDN87RH/ELS Connecting the Loudspeakers, Connecting the Center Speaker/ Surround Speaker, CENTER SPEAKER, Connect the CENTER SPEAKER, ed on the rear of the system

Connecting the Loudspeakers

GB
			The loudspeaker connector terminals are locat-
			ed on the rear of the system.
			There are four terminals on the system:
PRE OUT			Two for the left speaker (marked L)
SUB
WOOFER
	FM 75Ω		Two for the right speaker (marked R)
	AM ANT.
OUT	DIGITAL OUT		To achieve the correct sound quality, connect the:
S-VIDEO	OPTICAL
VIDEO			Red wire to the + terminals
OUT
	LINE OUT
CENTER SPEAKER			Black wire to the – terminals
(6Ω )	AUX IN
SURROUND
SPEAKER
(6Ω )
	FRONT
	SPEAKERS
	(6Ω	)
			1 To connect a wire to a terminal, push the tab as far
				as it will go:
(+) (–)			(+) (–)	To the right on the system
FRONT			2	Insert the wire, up to the plastic sheathing, in the hole.
			3 Push the tab back:
SPEAKERS
(6Ω	)
				To the left on the system, until it clicks into place
				To the top on the loudspeaker
				Result: The wire is pinched and held firmly in place.
			4	Repeat the operation for each wire.

Connecting the Center Speaker/ Surround Speaker

CENTER SPEAKER Connect the CENTER SPEAKER.

Connect the center speaker cord to the CENTER

(+) (–) SPEAKER terminal.

	CENTER SPEAKER
	(6Ω	)
		L
	SURROUND
SUB	SPEAKER
PRE OUT
WOOFER
	(6Ω	)
FM 75Ω		R
	AM ANT.
S-VIDEO	DIGITAL OUT
OUT	OPTICAL
VIDEO
OUT
	LINE OUT
CENTER SPEAKER
(6Ω )	AUX IN
SURROUND
SPEAKER
(6Ω )
	FRONT
	SPEAKERS
	(6Ω )

(+) (–)(+) (–)

SURROUND SPEAKER	SURROUND SPEAKER
(right)	(left)

Connect the SURROUND SPEAKERS.

There is no difference between the surround speakers. Both speakers can be connected as R (right) or L (left).

Connect the surround speaker cords to the SURROUND SPEAKERS terminals.

8