Connecting the AM (MW)/LW Aerial
The AM aerial (for long and medium waves) can be:◆Placed on a stable surface◆Fixed to the wall (you must first remove the base)The AM aerial connector terminals are located on the rear of the system and are marked AM.
How to connect a WIRE TYPE aerial.
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial. |
|
◆ Connect a 75Ω antenna to the FM antenna terminal. | GB |
◆Plug the connector on the FM aerial supplied into the coaxial socket (75Ω ) marked FM on the rear of the system.
◆Follow the instructions given on Page 12 to tune into a radio station, and determine the best position for the aerial.
◆If reception is poor, you may need to install an outdoor aerial.To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
9