Samsung MM-VB7 Timer Function, VOL, TIMER, Example:, Program/Set, Program/Set, If you select, You must also, specific times, Press Program/Set, Press Program/Set

Timer Function

GB

The timer enables you to switch the system on or off at

9

Press Standby/On (

) to set the system to standby mode.

specific times.

Example: You wish to wake up to music every morning.

Result:

is displayed to the upside left of the time, indicating that

the timer has been set. The system will switch on and off

automatically at the required times.

If you no longer want the system to be switched on or off

automatically, you must cancel the timer.

If the timer switch on and off times are identical, the word

Before setting the timer, check that the current time is correct.

ERROR is displayed.

You can use the

/

button on the main unit to instead

For each step, you have a few seconds to set the required

/

button

in step 4,5,6,7.

options. If you exceed this time, you must start again.

1

Switch the system on by pressing Standby/On (

) .

2

Press Timer/Clock until

TIMER is displayed.

3

Press Program/Set.

Result: ON TIME is displayed (instead of the equalizer symbols) for a

1,9

few seconds, followed by any switch-on time already set; you

can set the timer switch-on time.

4

Set the timer switch-on time.

a Set the hour by pressing

or

button.

b

Press Program/Set.

Result: The minutes flash.

c Set the minutes by pressing

or

button.

2

d

Press Program/Set.

Result: OFF TIME is displayed (instead of the equalizer symbols)

for a few seconds, followed by any switch-off time already

set; you can now set the timer switch-off time.

5

Set the timer switch-off time.

a Set the hour by pressing

or

button.

b

Press Program/Set.

3,4,5,6,7,8

Result: The minutes flash.

c Set the minutes by pressing

or

button.

d

Press Program/Set.

Result: VOL 10 is displayed, where 10 corresponds to the

volume already set.

6

Press

or

button to adjust the volume level and press

4,5,6,7

4,5,6,7

Program/Set.

Result: The source to be selected is displayed.

7

Press

or

button to select the source to be played when the

system switches on.

If you select...

You must also...

TAPE (cassette)

Insert a cassette tape.

TUNER (radio)

a Press Program/Set.

bSelect a preset station by pressing

, (remote control) or , (main unit).

CD (compact disc)Load a compact disc.

8 Press Program/Set to confirm the timer.

21