Samsung 230 W 2Ch Mini Audio System J630 MX-J630 Setting the Clock, Timer Function, Result:, Result:, Press the, Press the ENTER, You can also use the, then press ENTER ( ) button

Setting the Clock

During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1.Switch the system on by pressing the POWER ( ) button.

2.Press the TIMER SET button and then press

the ENTER ( ) button, "CLOCK" is displayed.

3. Press the ENTER ( ) button. The hour flashes.

•To increase the hours, press: ,

•To decrease the hours, press: .

4.When the correct hour is displayed, press the

ENTER ( ) button. The minutes flash.

•To increase the minutes, press: ,

•To decrease the minutes, press: .

5.When the correct minute is displayed, press the

ENTER ( ) button. " TIME" appears in the display.

•The current time is now set.

• You can display the time, even when you are using another function, by pressing the TIMER SET button once.

•You can also use the ], [ or the VOLUME/JOG control on the front panel instead of the , or . button in Steps 3 and 4.

Timer Function

The timer enables you to switch the system on or off at specific times automatically.

•Before setting the timer, confirm that the current time is correct.

•During each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

•If you no longer want the system to be switched on or off automatically, cancel the timer by pressing the TIMER ON/OFF button.

Example: You want to wake up to music every morning.

1.Switch the system on by pressing the POWER ( )button.

2.Press the TIMER SET button until TIME is displayed.

3.Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the timer switch-on time.

4.Set the timer switch-on time.

a.Press the , or . button to set the hours.

b.Press the ENTER ( ) button. Result: The minutes flash.

c.Press the , or . button to set the minutes.

d.Press the ENTER ( ) button.

Result: OFF is displayed for a few seconds. You can now set the timer switch-off time.

5.Set the timer switch-off time.

a.Press the , or . button to set the hours.

b.Press the ENTER ( ) button. Result: The minutes flash.

c.Press the , or . button to set the minutes.

d.Press the ENTER ( ) button.

Result: VOL XX is displayed, where XX corre- sponds to the volume already set.

6.Press the , or . button to adjust the volume level, and then press the ENTER ( )button. Result: The source to be selected is displayed.

7.Press the , or . button to select the desired source to be played when the system switches on.

If you select... You must also...

FM (radio) a Press the ENTER ( ) button.

bSelect a preset station by pressing the , or . button.

CD/MP3 (compact disc)	Load one compact disc.
USB	Connect the USB device.

8.Press the ENTER ( ) button.

Result: CHKREC (Do you want to record?) is dis- played.

9.Press the ENTER ( ) button.

Result: REC N is displayed. You can press the

,or . button to select REC Y or REC N, and

then press ENTER ( ) button.

1). If you select REC N, the MiNi Hi-Fi Component will not record when it turns on. If you have already set a tuner timer recording, selecting REC N cancels it. Note that the MiNi Hi-Fi Component will still turn on and off at the times you set earlier in this procedure.

2). If you select the REC Y, you can set the MiNi Hi-Fi Component to record when it turns on. The recording switch on and switch off times can be different from the timer switch on and off times you set earlier in this procedure.

a.Press the ENTER ( ) button.

Result: ON is displayed for a few seconds. You can set the tuner timer recording switch-on time.

English 15