Samsung 230 W 2Ch Mini Audio System J630 MX-J630 Cancelling the Timer, Listening to Radio, Using buttons on the Remote Control, Using buttons on the Main Unit, Selecting Mono or Stereo, Presetting Stations

b.Press the ENTER ( ) button. Result: OFF is displayed for a few seconds. You can set the tuner timer recording switch-off time.

•The maximum tuner timer recording time is 5 hours.

•If the timer switch on and off times are identical, the word ERROR is displayed.

•When there is no disc in or USB connected to the MiNi Hi-Fi Component, if you select "MP3/CD" or "USB 1 or USB 2", the MiNi Hi-FI Component automatically selects "TUNER".

•You may use the ], [ buttons or the VOLUME/JOG control on the main unit instead of the , or . button to adjust settings in Steps 4 through 9.

•If the switch-on or -off time is the same as the timer recording time, only the switch-on or -off time is effective, and the timer recording time is not applied.

•If the auto timer is turned on, the MP3/CD or USB function may require an additional step to be activated depending on the disc (or device). It is better for you to select the tuner function instead.

Cancelling the Timer

After you have set the timer, the unit will start automatically at the time shown by the TIMER indication on the display. If you no longer want to use the timer, you must cancel it.

1.Press the TIMER ON/OFF button to cancel the timer.

2.Press the TIMER ON/OFF button again to restart the timer.

•When you select the OFF-TIMER mode, the TIMER RECORDING and TIMER function are not available.

Listening to Radio

You can store up to 15 FM stations.

Using buttons on the Remote Control

1.Press the TUNER button to select FM.

2.Tune to the desired station.

•Preset Tuning : Press the TUNING MODE button to select PRESET, and then press TUNING [ or ] button to select the preset station.

•Automatic Tuning : Press the TUNING MODE button to select MANUAL, and then press and hold the TUNING [ or ] button to automatically search for active broadcasting stations.

•Manual Tuning : Press the TUNING MODE button to select MANUAL, and then briefly press the TUNING [ or ] button to increase or decrease the frequency incrementally.

Using buttons on the Main Unit

1.Press the TUNER/AUX button to select FM.

2.Tune to the desired station.

•Preset Tuning : Press the STOP ( @ ) button to select PRESET, and then press [ or ] button to select the preset station.

•Automatic Tuning : Press the STOP ( @ ) button to select MANUAL, and then press and hold the [ or ] button to automatically search for active broadcasting stations.

•Manual Tuning : Press the STOP ( @ ) button to select MANUAL, and then briefly press the [ or ] button to increase or decrease the frequency incrementally.

Selecting Mono or Stereo

1.Press the MO/ST button.

•Each time you press the button, the sound switches between STEREO and MONO.

•In a poor reception area, select MONO for a clear, interference-free broadcast.

•This applies only when listening to an FM station.

Presetting Stations

Example : Presetting FM 89.10 in the memory.

1.Press the TUNER button to select FM.

2.Press the TUNING MODE button to select the <MANUAL> mode.

3.Press the TUNING [ or ] button to select <89.10>.

4.Press the MEMORY button.

•FM followed by a flashing number appears in the display. That number is the current preset number.

5.Press the TUNING [, ]or the ,, .buttons to scroll through and select a preset number.

•You can select a number from 1 to 15.

6.Press the ENTER () button.

• Press the ENTER ( ) button before number disappears from the display.

•Number disappears from the display and the station is stored in memory.

7.To preset another station, repeat steps 2 to 6.

•To tune to a preset station, press the TUNING [ or ] to select a channel.

•You can also use the [ or ] button on the front panel instead of the TUNING [ or ] button in step 3, 5, 7.

16 English