Samsung P63FP V-Position, Auto Adjustment, Signal Control, Signal Balance, Signal Balance, Off, Fine, Note, Coarse, R-Gain, Picture, Picture, Picture, Picture, Picture

Adjusting the PDP Display

V-Position

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → → → → ENTER → [V-Position] → , → ENTER

Adjusts the screen location vertically.

Auto Adjustment

MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

(Available in PC mode only)

Note

The direct button on the remote control is the 'AUTO' button.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Balance ]

(Available in PC mode only)

Signal Balance

MENU → → ENTER → [Picture] → → → → → → → ENTER → [Signal Balance ] → ENTER → [Signal Balance] → , → ENTER

Selects either On or Off with the signal control.

Signal Control

MENU → → ENTER → [Picture] → → → → →→ → ENTER → [Signal Balance]

→→ ENTER → [Signal Control]1.R-Gain

MENU → → ENTER → [Picture] → → → → →→ → ENTER → [Signal Balance] → → ENTER → [Signal Control] → ENTER → [R-Gain] → , → ENTER