Adjusting the PDP Display

Blue

MENU → → ENTER → [Picture] → → → → ENTER → [Color Control] → → →

ENTER → [Blue] → , → ENTER

Color Temp.

MENU → → ENTER → [Picture] → → → → ENTER → [Color Temp.] → , → ENTER

Color Temp. is a measure of the 'warmth' of the image colors.

Note

This function is only enabled if the Color Tone is set to Off.

Image Lock

Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

(Available in PC mode only)

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock]

Coarse

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → ENTER

→[Coarse] → , → ENTER

Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

Fine

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →

ENTER → [Fine] → , → ENTER

Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

H-Position

MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → →

→ENTER → [H-Position] → , → ENTER

Adjusts the screen location horizontally.