REVERSING THE DOOR SWING
- Read these instructions completely and carefully
Warning
Note
Samsung recommends that reversing of the door opening is only completed by Samsung approved Service providers. This will be on a chargeable basis and at the customers expense.
Any damage caused while attempting to reverse the door opening is not covered under the appliance manufactures warranty. Any repairs requested due to this circumstance will be completed on a chargeable basis at the customers expense.
1.Handle parts carefully to avoid scratching the paint.
2.Lay out all the screws by their related parts to avoid using them in the wrong places.
3.Provide a
4.During door reversing, refrigerator should not be stained with oil.
5.We recommend to use tools descrided below. (Possible to use simliar size of socket wrench & wrench)
Not provided | Additional part |
|
|
|
|
|
| |
Phillips Head | Flat Head | 10mm | 11mm | Allen Wrench | Cover Wire | |
Socket Wrench | Wrench | (3/16inch) | Hinge L | |||
Driver (+) | Driver | |||||
(for bolts) | (for hinge shaft) | (for Mid hinge) | (In Top Cover) | |||
|
| |||||
|
|
|
|
|
|
-DISASSEMBLY OF THE FRIDGE DOOR
These operating instructions cover various models.
The characteristics of your appliance may differ slightly from those described in this instructions.
1. Disassemble the CAP CABI | 2. Disconnect electric wires | 3. Remove 3 bolts on the top |
after removing 2 screws. | inside of the CAP CABI. | of the refrigerator with 10mm |
|
| socket wrench. Make sure the |
|
| door is firmly closed. |
CAP CABI |
|
|
4.Disassemble the Fridge door by lifting it upward.
Be careful not to drop and scratch the face of the Fridge door.
5.Disassemble the COVER WIRE DOOR on the top of the fridge door with a flat- head screw driver by putting it into the indicated position(∆).
6.Disjoin the COVER WIRE HINGE R from the ASSY HINGE UPP as shown. Take out the electric wire from the
COVER WIRE HINGE R.
COVER WIRE HINGE R
COVER WIRE DOOR
ASSY HINGE UPP
15